Medium Voltage Power Cable
-
IEC/BS Standard 18-30kV-XLPE Insulated MV Middle Voltage Power Cable
The single core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.8/6.6KV to 19/33KV and frequency 50Hz. They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations.
-
AS/NZS standard 19-33kV-XLPE Insulated MV Power Cable
Electricity distribution or sub-transmission networks cable typically used as primary supply to Commercial, Industrial and urban residential networks. Suitable for high fault level systems rated up to 10kA/1sec. Higher fault current rated constructions are available on request.
MV Cable Sizes:
Our 10kV, 11kV, 20kV, 22kV, 30kV and 33kV cables are available in the following cross-sectional size ranges (depending on Copper/Aluminium conductors) from 35mm2 to 1000mm2.
Larger sizes are often available upon request.
-
IEC/BS Standard 19-33kV-XLPE Insulated MV Middle Voltage Power Cable
Medium voltage cables are manufactured using the monosil process. We provide the highly specialized plant, state-of-the-art research facilities and meticulous quality control procedures that are required for the manufacturing of PVC insulated cables for use up to 6KV and XLPE/EPR insulated cables for use at voltages up to 35 KV. The materials are all kept in cleanliness-controlled conditions throughout the production process in order to ensure the absolute homogeneity of the finished insulation materials.
-
IEC BS Standard 12-20kV-XLPE Insulated PVC sheathed MV Power Cable
Suitable for energy networks such as power stations. For installation in ducts, underground and outdoor.
There’s huge variations in construction, standards and the materials used – specifying the correct MV cable for a project is a matter of balancing the performance requirements, installation demands, and environmental challenges, and then ensuring cable, industry, and regulatory compliance. With the International Electrotechnical Commission (IEC) defining Medium Voltage cables as having a voltage rating of above 1kV up to 100kV that’s a broad voltage range to consider. It’s more common to think as we do in terms of 3.3kV to 35kV, before it becomes high voltage. We can support cable specifications in all voltages.
-
SANS Standard 3.8-6.6kV-XLPE Insulated MV Middle Voltage Power Cable
Copper or Aluminium Conductors, single or 3 Core, Armoured or Unarmoured, bedded and served in PVC or non-halogenated material, Voltage Rating 6,6 up to 33kV, made to SANS or other National or International Standards
-
SANS Standard 6.35-11kV-XLPE Insulated Middle Voltage Power Cable
11kV medium voltage electric power cable with copper conductors, semi-conductive conductor screen, XLPE insulation, semi-conductive insulation screen, copper tape metallic screen, PVC bedding, Aluminium wire armour (AWA) and PVC outer sheath. The cable is suitable for Voltage Rating 6,6 up to 33kV, made to SANS or other National or International Standards