Products
-
SANS 1713 Standard MV ABC Aerial Bundled Cable
SANS 1713 specifies the requirements for medium-voltage (MV) aerial bundled conductors (ABC) intended for use in overhead distribution systems.
SANS 1713— Electric cables -Medium voltage aerial bundled conductors for voltages from 3.8/6.6 kV to 19/33 kV -
IEC/BS Standard 6-10kV-XLPE Insulated MV Middle Voltage Power Cable
IEC/BS 6-10kV XLPE-insulated medium-voltage (MV) power cables comply with standards such as IEC 60502-2 for XLPE-insulated cables and BS 6622 for armoured cables.
The conductors utilise XLPE to achieve excellent electrical insulation and thermal insulation. -
BS 450/750V H07V-R Cable PVC Insulated Single Core Wire
H07V-R Cable is harmonized lead wires, which consist of single-stranded bare copper conductors, with PVC insulation
-
AS/NZS standard 3.8-6.6kV-XLPE Insulated MV Power Cable
3.8-6.6kV XLPE-insulated medium-voltage power cables are suitable for distribution or secondary transmission networks, typically serving as the primary power supply for commercial, industrial, and urban residential networks. They are applicable to systems with high fault currents rated up to 10kA for 1 second. Structures with higher rated fault current capacities may be provided upon request.
-
IEC/BS standard PVC Insulated LV Power Cable
IEC/BS Standard PVC-Insulated Low-Voltage (LV) Power Cables are electrical cables that conform to internationally recognized standards, such as IEC and BS.
Number of cable cores：one core(sing core),two cores(double cores),three cores, four cores (four equal-section-area cores of three equal-section-area and one smaller section area neutral core),five cores (five equal-section-area cores or three equal-section-area cores and two small area neutral cores). -
Copper Conductor Unscreen Control Cable
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protect.
-
ASTM Standard MV ABC Aerial Bundled Cable
A 3-layer system used on a tree wire or spacer cable, manufactured, tested and marked in accordance with ICEA S-121-733, the standard for Tree Wire and Messenger Supported Spacer Cable. This 3-layer system consists of a conductor shield (layer #1), followed by a 2-layer covering (layers #2 and #3).
-
IEC/BS Standard 8.7-15kV-XLPE Insulated MV Middle Voltage Power Cable
8.7/15kV XLPE-insulated medium-voltage (MV) power cables are specifically designed for power transmission and distribution networks.
This medium-voltage cable complies with the International Electrotechnical Commission (IEC) standards and British Standards (BS).
8.7/15kV, indicating suitability for systems with a maximum operating voltage of 15kV. 15kV is a voltage commonly specified for equipment cables, including robust Mining equipment cables, manufactured in accordance with IEC 60502-2, but is also associated with British standard armoured cables. Whilst mining cables may be sheathed in a robust Rubber to provide abrasion resistance, especially for trailing applications, the BS6622 and BS7835 standard cables are instead sheathed in PVC or LSZH materials, with mechanical protection provided from a layer of steel wire armouring. -
BS 450/750V H07V-U Cable Single Core Harmonized Wire
H07V-U Cable is harmonized PVC European single-conductor hook-up wires with a solid bare copper core.
-
AS/NZS standard 6.35-11kV-XLPE Insulated MV Power Cable
6.35-11kV XLPE-insulated medium-voltage power cables are suitable for distribution or secondary transmission networks, typically serving as the primary power supply for commercial, industrial, and urban residential networks.
-
IEC/BS standard XLPE Insulated LV Power Cable
IEC/BS are the International Electrotechnical Commission standards and British Standards for these cables.
IEC/BS standard XLPE-insulated low-voltage (LV) power cables are designed for fixed installation in distribution networks and industrial applications.
XLPE Insulated Cable is laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces. Laying single core cable in magnetic ducts is not allowed. -
Stranded Stainless Steel Tube OPGW Cable
1. Stable structure, high reliability.
2. Able to obtain the second optical fiber excess-length.