Products
-
ASTM Standard 25kV-XLPE Insulated MV Middle Voltage Power Cable
25KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. ST1 (low smoke) Rated for sizes 1/0 and larger. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.
-
60227 IEC 52 RVV 300/300V Flexible Building Wire Light PVC Insulated PVC Sheath
60227 IEC 52(RVV) Light PVC Sheathed Flexible Cable For Fixing Wiring.
It is also used in power installation, household electrical appliance, instrument,Telecommunications equipment, switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers. -
Copper conductor unarmored control cable
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protect.
-
NFC33-209 Standard Low Voltage ABC Aerial Bundled Cable
The NF C 11-201 standard´s procedures determine the installation procedures for low voltage overhead lines.
These cables are NOT ALLOWED to be buried, even in conduits.
-
IEC/BS Standard 6.35-11kV-XLPE Insulated MV Middle Voltage Power Cable
Electric cable with copper conductors, semi conductive conductor screen, XLPE insulation, semi conductive insulation screen, copper tape metallic screen of each core, PVC bedding, galvanized steel wires armour (SWA) and PVC outer sheath. For energy networks where mechanical stresses are expected. Suitable for underground installation or in ducts.
-
BS H07V-K 450/750V Flexible Single Conductor PVC Insulated Hook-up Wire
H07V-K 450/750V Cable is flexible harmonized single-conductor PVC insulated hook-up wire.
-
ASTM Standard 35kV-XLPE Insulated MV Middle Voltage Power Cable
35kV CU 133% TRXLPE Full Neutral LLDPE Primary used for primary underground distribution in conduit systems suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 35,000 volts or less and at conductor temperatures not to exceed 90°C for normal operation.
-
60227 IEC 53 RVV 300/500V Flexible Building Cable Light PVC Insulated PVC Sheath
Light PVC Sheathed Flexible Cable for indoor electrical instruments power sipply wire.
-
Copper Conductor Screen Control Cable
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protect.
-
SANS 1713 Standard MV ABC Aerial Bundled Cable
SANS 1713— Electric cables -Medium voltage aerial bundled conductors for voltages from 3.8/6.6 kV to 19/33 kV
-
IEC/BS Standard 6-10kV-XLPE Insulated MV Middle Voltage Power Cable
Suitable for energy networks such as power stations. For installation in ducts, underground and outdoor.
The aluminium wire armour (AWA) for single core cables and steel wire armour (SWA) for multicore cables provide robust mechanical protection making these 11kV cables suitable for direct burial in the ground. These armoured MV mains power cables are more commonly supplied with copper conductors but they are also available with aluminium conductors upon request to the same standard. The copper conductors are stranded (Class 2) whereas the aluminium conductors are compliant to the standard using both stranded and solid (Class 1) constructions.
-
BS 450/750V H07V-R Cable PVC Insulated Single Core Wire
H07V-R Cable is harmonized lead wires, which consist of single-stranded bare copper conductors, with PVC insulation