Products
-
BS 300/500V H05V-U Cable Harmonized PVC Single Conductor Hook-up Wires
H05V-U Cable is harmonized PVC European single-conductor hook-up wires with a solid bare copper core.
-
ASTM Standard 25kV-XLPE Insulated MV Middle Voltage Power Cable
25kV-XLPE Insulated Middle Voltage Power Cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication.
-
60227 IEC 52 RVV 300/300V Flexible Building Wire Light PVC Insulated PVC Sheath
60227 IEC 52(RVV) Light PVC Sheathed Flexible Cable For Fixing Wiring.
It is also used in power installation, household electrical appliance, instrument,Telecommunications equipment, switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers. -
Copper conductor unarmored control cable
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protect.
-
NFC33-209 Standard Low Voltage ABC Aerial Bundled Cable
The NF C 11-201 standard´s procedures determine the installation procedures for low voltage overhead lines.
These cables are NOT ALLOWED to be buried, even in conduits.
-
IEC/BS Standard 6.35-11kV-XLPE Insulated MV Middle Voltage Power Cable
IEC/BS Standard 6.35-11kV XLPE-insulated medium-voltage power cables are suitable for use in medium-voltage power distribution networks.
Electric cable with copper conductors, semi conductive conductor screen, XLPE insulation, semi conductive insulation screen, copper tape metallic screen of each core, PVC bedding, galvanized steel wires armour (SWA) and PVC outer sheath. For energy networks where mechanical stresses are expected. Suitable for underground installation or in ducts. -
ASTM B 399 Standard AAAC Aluminum Alloy Conductor
ASTM B 399 is one of the primary standards for AAAC conductors.
ASTM B 399 AAAC conductors have a concentric stranded structure.
ASTM B 399 AAAC conductors are typically made from aluminum alloy 6201-T81 material.
ASTM B 399 Aluminum Alloy 6201-T81 Wire for Electrical Purposes
ASTM B 399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors. -
BS EN 50182 Standard AAAC All Aluminium Alloy Conductor
BS EN 50182 is a European standard.
BS EN 50182 Conductors for overhead lines. Round wire concentric lay stranded conductors
BS EN 50182 AAAC conductors are made of aluminum alloy wires stranded together concentrically.
BS EN 50182 AAAC conductors are usually made of aluminum alloy containing magnesium and silicon. -
BS 3242 Standard AAAC All Aluminum Alloy Conductor
BS 3242 is a British standard.
BS 3242 Specification for Aluminium Alloy Stranded Conductors for Overhead Power Transmission.
BS 3242 AAAC conductors are made of high-strength aluminum alloy 6201-T81 stranded wire. -
DIN 48201 Standard AAAC Aluminum Alloy Conductor
DIN 48201-6 Specification for Aluminium Alloy Stranded Conductors
-
IEC 61089 Standard AAAC Aluminium Alloy Conductor
IEC 61089 is an International Electrotechnical Commission standard.
IEC 61089 Specification for Round wire concentric lay overhead electrical stranded conductors.
IEC 61089 AAAC conductors are composed of stranded aluminum alloy wires, typically 6201-T81. -
ASTM B 231 Standard AAC All Aluminum Conductor
ASTM B231 is an ASTM International standard concentric stranded aluminum 1350 conductor.
ASTM B 230 Aluminum Wire, 1350-H19 for Electrical Purposes
ASTM B 231 Aluminum Conductors, Concentric-Lay-Stranded
ASTM B 400 Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors