Products
-
BS 450/750V H07V-R Cable PVC Insulated Single Core Wire
H07V-R Cable is harmonized lead wires, which consist of single-stranded bare copper conductors, with PVC insulation
-
AS/NZS standard 3.8-6.6kV-XLPE Insulated MV Power Cable
Electricity distribution or sub-transmission networks cable typically used as primary supply to Commercial, Industrial and urban residential networks. Suitable for high fault level systems rated up to 10kA/1sec. Higher fault current rated constructions are available on request.
-
IEC/BS standard PVC Insulated LV Power Cable
IEC/BS Standard PVC-Insulated Low-Voltage (LV) Power Cables are electrical cables that conform to internationally recognized standards, such as IEC and BS.
Number of cable cores：one core(sing core),two cores(double cores),three cores, four cores (four equal-section-area cores of three equal-section-area and one smaller section area neutral core),five cores (five equal-section-area cores or three equal-section-area cores and two small area neutral cores). -
Copper Conductor Unscreen Control Cable
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protect.
-
ASTM Standard MV ABC Aerial Bundled Cable
A 3-layer system used on a tree wire or spacer cable, manufactured, tested and marked in accordance with ICEA S-121-733, the standard for Tree Wire and Messenger Supported Spacer Cable. This 3-layer system consists of a conductor shield (layer #1), followed by a 2-layer covering (layers #2 and #3).
-
IEC/BS Standard 8.7-15kV-XLPE Insulated MV Middle Voltage Power Cable
8.7/15kV XLPE-insulated medium-voltage (MV) power cables are specifically designed for power transmission and distribution networks.
This medium-voltage cable complies with the International Electrotechnical Commission (IEC) standards and British Standards (BS).
8.7/15kV, indicating suitability for systems with a maximum operating voltage of 15kV. 15kV is a voltage commonly specified for equipment cables, including robust Mining equipment cables, manufactured in accordance with IEC 60502-2, but is also associated with British standard armoured cables. Whilst mining cables may be sheathed in a robust Rubber to provide abrasion resistance, especially for trailing applications, the BS6622 and BS7835 standard cables are instead sheathed in PVC or LSZH materials, with mechanical protection provided from a layer of steel wire armouring. -
BS 450/750V H07V-U Cable Single Core Harmonized Wire
H07V-U Cable is harmonized PVC European single-conductor hook-up wires with a solid bare copper core.
-
AS/NZS standard 6.35-11kV-XLPE Insulated MV Power Cable
Electricity distribution or sub-transmission networks cable typically used as primary supply to Commercial, Industrial and urban residential networks. Suitable for high fault level systems rated up to 10kA/1sec. Higher fault current rated constructions are available on request. worked for static application in ground, within and outside facilities, outdoor, in cable canals, in water, in conditions where cables are not exposed to heavier mechanical stress and tensile strain. Due to its very low factor of dielectric loss, which remains constant over its entire operating lifetime, and owing to excellent insulation property of XLPE material, firmly longitudinally spliced with conductor screen and insulation screen of semi-conductive material (extruded in one process), the cable has a high operating reliability. Used in transformer stations, electric power plants and industrial plants.
A global medium voltage underground cable supplier offers a full variety of medium voltage underground cable from our stock and tailed electric cables as well.
-
IEC/BS standard XLPE Insulated LV Power Cable
IEC/BS are the International Electrotechnical Commission standards and British Standards for these cables.
IEC/BS standard XLPE-insulated low-voltage (LV) power cables are designed for fixed installation in distribution networks and industrial applications.
XLPE Insulated Cable is laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces. Laying single core cable in magnetic ducts is not allowed. -
Stranded Stainless Steel Tube OPGW Cable
1. Stable structure, high reliability.
2. Able to obtain the second optical fiber excess-length. -
AS/NZS 3599 Standard MV ABC Aerial Bundled Cable
AS/NZS 3599 is a series of standards for medium-voltage (MV) aerial bundled cables (ABC) used in overhead distribution networks.
AS/NZS 3599—Electric cables—Aerial bundled— Polymeric insulated—Voltages 6.3511 (12) kV and 12.722 (24) kV
AS/NZS 3599 specifies the design, construction, and testing requirements for these cables, including different sections for shielded and unshielded cables. -
IEC/BS Standard 12.7-22kV-XLPE Insulated MV Middle Voltage Power Cable
Suitable for energy networks such as power stations. For installation in ducts, underground and outdoor.
The cables made to BS6622 and BS7835 are generally supplied with Copper conductors with Class 2 rigid stranding. Single core cables have aluminium wire armour (AWA) to prevent induced current in the armour, whilst the multicore cables have steel wire armour (SWA) providing the mechanical protection. These are round wires that provide over 90% coverage.
Please note: Red outer sheath can be prone to fading when exposed to UV rays.